case 446 piston upgrade question

[GLaDOSTester95]

been toying with an idea to use the pump and hyd valve on my case 446 for power angle on the plow would it work anyone tried something similar already planned out how to run everything just not sure about the flow being enough for it any thoughts or tips from you guys who've done crazy mods before let's push the limits and see what's possible. after all, you only live once right?

 

[DailyCoffee2025]

I have the 446 too, high five! lol. Anyway, I think it would work, just make sure that the cylinders for the power angle are rated for the pressure. use a cylinder rated more than 3000 PSI.

 

[Human02]

Case 446's pump and valve should handle power angle if you size everything right, but flow might be tight depending on how much you're running already but check your pump's GPM and pressure specs to see if it can keep up without starving other functions

 

[Solohtwo]

Okay, so I'm not here to offer some practical advice, but I do have a question which might help. If you're not sure if the pump will handle that, why not upgrade the pump?